To remove a bad piece of siding, you have to pull out two rows of nails: the ones in the bad board itself, and those in the board directly above. Siding is thin and splits easily, so the tricky part of this job is pulling nails without damaging surrounding boards. A cat’s paw is the best tool for digging out nails if damage to the surrounding wood doesn’t matter (Photo 1).
A fresh paint job has the power to totally transform the look of your house in less time and for less cash than any other remodeling project. That thin skin of resin and pigment also protects your investment, shielding it from sun, wind, and rain—until the paint begins to crack and peel, that is. Then it's time to button up with a couple of new coats. Properly applied, new paint should last for a good 15 years, provided you use top-quality materials, apply them with care (and with an eye on the weather), and, most important, clean and sand every surface first. Here's what you need to know to get a first-class finish on your home's exterior.
I would probably give James Lee and his company a "5", but we had to suspend our project due to some family issues. It was a pleasure to meet and talk about our painting needs and his proposal and estimate was professional, detailed and reasonable. It's clear why he has so many excellent reviews. We look forward to doing business with House Painting Inc. in the future.
There are always businesses that stand out from the rest, and that describes Foothill Painting very well. After seeing their excellent work on a neighbor's home, as well as other positive reviews on Angie's List we contacted them for a complete repainting of our house, including a detached three car garage and some interior walls and trim. From the very first meeting with Kevin, one of the co-owners, we knew we were in good hands. The estimate was detailed and professional.
Once you have removed all the loose paint, you should apply an appropriate primer to some of the distressed areas, especially if your paint-removal system has exposed raw wood or bare metal. The kind of primer you use depends on the kind of paint you'll be using later. For latex paint, use latex primers; for solvent-thinned paints, use solvent-base primers; and for metals, use metal primers. Not only do these coatings provide extra protection against the elements, they also form a firm foundation for finishing paints. Also, priming is always required when you're working on new wood.
Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.