House Painting Denver

I would probably give James Lee and his company a "5", but we had to suspend our project due to some family issues. It was a pleasure to meet and talk about our painting needs and his proposal and estimate was professional, detailed and reasonable. It's clear why he has so many excellent reviews.  We look forward to doing business with House Painting Inc. in the future.
To remove a bad piece of siding, you have to pull out two rows of nails: the ones in the bad board itself, and those in the board directly above. Siding is thin and splits easily, so the tricky part of this job is pulling nails without damaging surrounding boards. A cat’s paw is the best tool for digging out nails if damage to the surrounding wood doesn’t matter (Photo 1).
For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.
All colors have a base tone which might not be as apparent on a small swatch, but when the color is painted over an entire wall or room – the base color will stand out. Brown colors will sometimes appear to have a pink hue to them, and greys very often have some purple or blue to them. To avoid being surprised by a base color, take some time to look at the color fan deck for the selected paint color to see where the color comes from.

We use third party data sources to conduct a criminal search, in the state in which the owner/principal of the company is located, for any relevant criminal activity associated with the owner/principal of the business, within the three years prior to such service professional's application for membership in the HomeAdvisor network. HomeAdvisor's third-party vendor uses a national criminal database ("NCD") to screen our service professionals. The comprehensiveness of the NCD varies by state. Please be aware that the reporting in the NCD is particularly limited in the following states: AL, CO, DE, GA, ID, KS, KY, LA, ME, MA, MI, MS, MT, NE, NV, NH, NM, SD, UT, VA, VT, and WY.


To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
When you go to the home improvement store, find out how much 12 gallons of the paint you want would cost, and that will help you determine your cost. Maybe it's a low-quality paint that costs $30, in which case you're looking at about $360 for paint. If you choose high-quality paint that costs around $70, your total paint cost could be closer to $840. Professionals also recommend that you add an extra 10 or 20 percent to your total square footage, depending on the type of siding you have. Some textures require extra paint because they're rough. This is especially true with wood and stucco siding.
Painting the exterior of your home is a very important aspect of owning your own home. Maintaining the exterior and interior paint protects your most prized investment from deterioration and also gives it that “wow factor” when friends and family see your paint job. Trust the Arizona Painting Company in Phoenix or Tucson to treat your home like it was our own.

Comment: We bought and had installed a fiberglass front door with sidelight panels that was primed but not painted. While taking the door off to paint it got a gouge in the front panel. We painted it black on the front and it did not come out well at all. hard to evenly coat, brush strokes show, etc. We are looking for someone to repair the gouge and repaint the entire door, black on the front and white on the back. We are hoping to get this done as soon as possible so the paint has to cure before the colder weather comes. Thank you


Once you have removed all the loose paint, you should apply an appropriate primer to some of the distressed areas, especially if your paint-removal system has exposed raw wood or bare metal. The kind of primer you use depends on the kind of paint you'll be using later. For latex paint, use latex primers; for solvent-thinned paints, use solvent-base primers; and for metals, use metal primers. Not only do these coatings provide extra protection against the elements, they also form a firm foundation for finishing paints. Also, priming is always required when you're working on new wood.
If your home was built before 1978, there is a good chance that lead paint was used in its construction. Scraping, sanding, or removing old paint can release toxic lead dust which can cause serious illness in children and pregnant women. Special handling is required when working with lead-based paints. If lead paint is present in your home, you will need to hire a lead-certified painting contractor or lead abatement contractor. Before getting started with your exterior painting project, consult your local building authority or visit www.epa.gov for more information.
×