House Painting Denver

For smoothing the edges of scraped spots here and there, you can wrap a piece of sandpaper around a wood block. For larger areas, it's less tiring and more effective to use an electric orbital sander. Move it up and down or back and forth across the surface to remove old paint and smooth rough edges at the same time. Don't use an electric disc sander or a belt sander. Both can leave swirls or dips in the wood that will show through a new coat of paint.

It's unfortunate James has gotten too big now that his pricing is absolutely crazy.  He quoted me $9500 to paint 6 bedrooms and 6 bathrooms (which he miscounted as it was actually 5 bedrooms and 5 small bathrooms).  That is 2x more than the next qualified, licensed painter on here.  He took one look at the size of my house and then decided he can try to gouge me for the most money he could.  Sad.
Also prime the ends of adjoining boards. This step pays off by slowing the moisture penetration that can lead to peeling at the joints. If the new siding is redwood or cedar, buy a special “stainblocking” primer. Both of these woods contain natural chemicals (tannins) that can bleed through paint, causing brownish stains. A stain-blocking primer will seal in the tannins.
Climate is another factor to consider. Sunlight, wind, rain and salty weather can all wear out exterior paint. Oil-based paint is durable against wind, rain and temperature changes, but sunlight tends to degrade it. Alkyd paint chalks and sheds very thin layers when it begins to wear. Latex paint is the more durable option for very sun-drenched and relatively dry climate areas. Latex paint with high vinyl content should be avoided, however. Acrylic resin is by far the more durable binder for outdoor latex paint.
Picking exterior house paint colors is a lot different than picking a color for a shirt or a car.  It may help to drive around to observe colors that other homeowners have combined on homes that are of similar size and design as yours.  There are also online resources that provide homeowners with the ability to create virtual makeovers of their home by combining colors together through their software programs as well.
Once you have removed all the loose paint, you should apply an appropriate primer to some of the distressed areas, especially if your paint-removal system has exposed raw wood or bare metal. The kind of primer you use depends on the kind of paint you'll be using later. For latex paint, use latex primers; for solvent-thinned paints, use solvent-base primers; and for metals, use metal primers. Not only do these coatings provide extra protection against the elements, they also form a firm foundation for finishing paints. Also, priming is always required when you're working on new wood.
If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth.

It's unfortunate James has gotten too big now that his pricing is absolutely crazy.  He quoted me $9500 to paint 6 bedrooms and 6 bathrooms (which he miscounted as it was actually 5 bedrooms and 5 small bathrooms).  That is 2x more than the next qualified, licensed painter on here.  He took one look at the size of my house and then decided he can try to gouge me for the most money he could.  Sad.
It was a pleasure working with Distinct Painting Co. from the estimate to completion. Kane Robinson (owner) is a true professional, both knowledgeable and friendly. The contract contained the date for painting to begin and they began earlier than expected. Preparation was quite involved as was the painting on my two story house. In spite of 25-40 mph wind gusts, they (Kane and Eric) continued to prep the house for painting. I am a bit of a perfectionist and appreciated the quality and attention to detail and the guarantee. The entire positive experience was worth every penny. My house looks incredible. I couldn't be happier and highly recommend Distinct Painting Co.
If you're lucky, all your house may need before repainting is a good, healthy bath. Wash it down with a hose, and go over stubborn dirt with a scrub brush and warm, soapy water. Or wash it down with a power washer. If you're not so lucky, then you just have to face the fact that a time-consuming and dirty job lies ahead of you. Do the job well, and your paint job will not only look better, but it will last for five to eight years on average.
Repaint — exteriors especially — before visible signs of wear appear, Bancroft says. Don’t wait until you see peeling or flaking paint. “If I have to spend 40 hours preparing the surface before we can paint, that time is going to result in a lot of extra costs. But if I can spend 10 hours preparing the surfaces to be painted, you’re going to save money,” Freeman says.

Start by thoroughly examining the outside of the house or outbuilding -- not just the exterior walls but under the eaves, around windows and doors, and along the foundation. Look for split shingles and siding, popped nails, peeling or blistering paint, mildew, and rust stains. Once you've identified the areas that need attention, roll up your sleeves and make the repairs.
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
A fresh coat of paint makes everything it touches seem brand new. But such new beginnings cost real money. Professional painters charge around $4,000 for labor and materials to paint the exterior of a 2,500-square-foot, two-story home and roughly $5,500 for the interior. Painters’ rates may range from $20 to $60 an hour, but around $40 is typical in urban areas.
Painters will need several supplies for your home exterior project in addition to paint. Consider personally providing any materials that can be obtained without a license to reduce project costs. Painting supplies are also handy to have around for maintenance and touch-up jobs after the job is complete. The cost to invest in painting supplies will probably run you no more than $200 to $300, unless you buy really high-quality products from specialized paint shops. Consider purchasing the following:
Painting your house is one of those maintenance projects that most homeowners undertake at some point, whether it's the outside or the inside. With the exception of hardened DIY-types (you know who you are!), just about all homeowners will hire painters at some point—whether to prepare their home for moving in, or for a sale, or perhaps to kick off a remodel with a new color scheme.

Every painting job develops a unique choreography as ladders go up and come down and tarps are unrolled and folded up. But two basic principles remain: 1) Start at the top and work down. 2) Work in the shade, out of the sun's glare. As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)


For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.

Even if you think you'll probably do the job yourself, it's good preparation to seek estimates from professional home painters, whether your painting the exterior or interior of your home. Then you'll have a financial point of comparison and you may benefit from what a home painting contractor has to say about the condition of your home, color choices and types of paint available. Let the painter make his pitch for a professional job before you decide what to do. You can still opt to do it yourself while having learned something worthwhile.
To get at the nails in the board above, shove a flat pry bar up under it and gently pry the board outward. In most cases, this will pop up the nailhead, so you can pull it with your hammer claw. If you run into a stubborn nail that won’t move easily, don’t use brute force and risk splitting the good board. Instead, slip a hacksaw blade behind the siding and cut the nail (Photo 2).You can’t get the new board in unless you pull the remaining shank of the cut nail (Photo 3).
For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.
Even if you think you'll probably do the job yourself, it's good preparation to seek estimates from professional home painters, whether your painting the exterior or interior of your home. Then you'll have a financial point of comparison and you may benefit from what a home painting contractor has to say about the condition of your home, color choices and types of paint available. Let the painter make his pitch for a professional job before you decide what to do. You can still opt to do it yourself while having learned something worthwhile.

Even the exterior of the building speaks to what goes on inside of those walls. We collaborated with TONO to make sure the building kept the integrity and character of its pre-existing structure and history, but still reflects TONO’s innovative brand. An example of this effort is the building’s exterior, which we put through a number of treatments in order to get it to its new dark gray hue -- garnished with TONO’s logo, some of which is painted directly on the brick.
James and his team were incredibly diligent and efficient. From the day they began, we had regular morning check-ins so we knew what to expect and to guarantee that colors were correct. Then they patched up our 100 year old house so the shingles looked like new once they were painted. They color-matched our expensive brands to a T. The paint went on quickly and never smelled toxic. I can't say enough positive things about them. Highly recommended.
Hiring the right commercial painting company is necessary if your business wants to maintain both a professional work environment for personnel and a welcoming space for clients. We specialize in repainting commercial properties and HOA’s in both Phoenix and Tucson. Trust the Arizona Painting Company in Phoenix or Tucson to treat your business like it was our own.
As you scrape, you may find that the wood has turned gray or black in some areas. Check for rot by probing these areas with a nail. Spots that are discolored but firm are simply weathered. Weathered wood doesn’t hold paint very well, so sand away the gray surface. If you find soft areas, you’ve got rot. Small, shallow soft spots can be dug out and repaired with a two-part filler such as Minwax High Performance Wood Filler. But when rot is deep and widespread, it’s best to replace the entire piece of wood.
×