House Painting Denver

Skip the do-overs and pick the perfect paint color the first time around. No matter what space, shade, or aesthetic you're looking for, we've got ideas. And then we've got some more ideas. We compiled all our best paint color advice in one place to make it even easier. By the time you're done with this story, you'll have your paint woes all solved.
Beginning with the prep work and ending with last coat of paint or the finishing, an exterior paint job will last anywhere from one to two weeks. After completion, homeowners using low-quality paint will need to repaint every four or five years to keep it well maintained; homeowners using high-quality paint can go longer without a new coat -- usually about seven or eight years, depending on the type of paint and material.
If you have ornamental or colorful trees, shrubbery or floral selections around your home you should figure their colors into the color scheme selection that is made.  These landscaping attributes will have an effect on how appealing the property is as a whole throughout the year.  Homes that have a great deal of trees can make the property darker and cast shadows onto the home.  Individuals will want to avoid darker colors for these situations.

Every painting job develops a unique choreography as ladders go up and come down and tarps are unrolled and folded up. But two basic principles remain: 1) Start at the top and work down. 2) Work in the shade, out of the sun's glare. As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)

Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.
Tom (the owner) responded quickly with an estimate and was able to add additional painting that we requested (e.g., paint window trim). He was also able to provide an accurate timeframe regarding when… the work would be completed. Schell met with us to help pick out our paint choices. She provide wonderful insight into the colors that might work. She didn't try to overly influence our choices but provided options and gave us her expert opinion when we asked. She also took into account our needs when scheduling the work. We needed to have repair work done on rotting wood on the window sills on our porch and a border removed from a bedroom. Jeff and Tracey provided expert carpentry work to fix things prior to painting. They were friendly and came to the job prepared with the tools and wood they needed. They got right to work and finished the job quicker than I would have expected. This isn't their first rodeo, as the saying goes. The painters (Shawn and company) came prepared for our job, worked hard, and explained any difficulties and suggested fixes (another coat of paint) encountered in our job. Shawn and his painters didn't waste any time not working - they each had their roles and attacked the job with energy. Shawn and crew were friendly and made sure they kept in touch with us daily to let us know when they planned to arrive and leave our job, accommodate our schedule, and let us know about the progress they were making. There was not a lot of standing around but much hard work, even in ninety plus degree weather. They also made sure that our three house cats didn't escape:) .
For smoothing the edges of scraped spots here and there, you can wrap a piece of sandpaper around a wood block. For larger areas, it's less tiring and more effective to use an electric orbital sander. Move it up and down or back and forth across the surface to remove old paint and smooth rough edges at the same time. Don't use an electric disc sander or a belt sander. Both can leave swirls or dips in the wood that will show through a new coat of paint.

A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
I contacted them via email on a Sunday evening after being referred by our neighbors. I heard back the next morning just after 9am. James Lee was there a couple hours later (or less??) to evaluate the job and present past work they've done. I had a more than competitive estimate the next day for the exterior of our home. James told me that they could start later that week, and on that Saturday they started prepping the job. David and his crew of 2 worked quickly, but professionally and thoroughly and finished by the following Thursday. I will definitely be using them again when it comes time to paint the interior of our home and will refer them without hesitation. We feel like we moved to a new home and love our paint job!
As any painter will tell you, prep work is just as important -- if not more important -- than the paint application itself. If the paint on your house is chipping or peeling, it needs to be scraped and sanded smooth before applying a new finish. In most cases, you won’t need to remove all the existing paint, but scraping, sanding, patching, caulking, and priming are critical steps that take place before the start of most exterior painting jobs.
×