Deciding which paint to use has gotten much easier now that acrylic latexes have pushed oil-based paints almost to extinction. The acrylics offer superior performance (they don't harden with age, the way oils do, so they move and breathe without blistering), they don't mildew as readily, and they emit fewer VOCs, so they comply with new air-quality regulations. They also work over both oil- and water-based primers.
From the moment we start working together, we will keep in touch with you so that you understand exactly what is going on throughout the painting process. We want to help you get back to your regular life as quickly as possible, so we will get your job done quickly, no matter how large. The bigger the job, the more painters we will send to complete it. Our services are guaranteed awesome (And fast. And friendly.).
At Refined Painting Services, we offer professional residential and commercial painting services in the Greater Portland, Oregon area. We commit to providing high-quality paint finishes, outstanding customer service, and meticulous care of your home and belongings throughout the duration of the job. Our company is fully licensed, bonded, and insured. Our Oregon CCB# is 203152. Contact us today to make your house feel like home!
Whether you decide to do the preparation work yourself or have a professional do it as part of your project, proper preparation makes all the difference in creating a smooth and lasting finish. Sure, it adds to your the total time and money spent on your project, but it's certainly worth doing the job right the first time. Otherwise, you'll spend additional time and money down the line on maintenance and repairs. To ensure proper preparation, follow this process before painting your home's exterior (keeping in mind that the process may vary based on exterior materials):
If your home was built before 1979, the paint might contain lead, which is extremely hazardous to children age 6 and younger. Call your local public health department for information on how to check for lead and handle lead paint safely. For a free booklet on dealing with lead paint, contact the U.S. Environmental Protection Agency at www.epa.gov/lead.
The house bath may reveal nails that have popped out of the siding or rusting nail heads that have left streaks of rust on exterior walls. If so, use sandpaper or steel wool to clean the nail heads. On clapboard siding, use a nail set to recess the nail head about ⅛ inch below the surface of the wood. Dab on a coat of rust-inhibiting primer (unless the nail is aluminum or nonrusting galvanized steel), and let it dry. Then fill the nail hole with spackle or putty. When the filler is dry, give it a coat of primer. For flathead nails, which cannot be recessed, sand the heads until they're shiny, and coat with primer.
For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.
Repaint — exteriors especially — before visible signs of wear appear, Bancroft says. Don’t wait until you see peeling or flaking paint. “If I have to spend 40 hours preparing the surface before we can paint, that time is going to result in a lot of extra costs. But if I can spend 10 hours preparing the surfaces to be painted, you’re going to save money,” Freeman says.
There are permanent features of the home that have their own colors which cannot be changed when painting the exterior of the home but can have a dramatic satisfaction level that is experienced when the painting is completed. Roofing shingles, paving blocks, concrete surfaces, stones and other such features are prime examples of the colors that should be considered when selecting your exterior color scheme for the home. Homeowners can work off of these colors to make a home that looks uniform and luxurious when the exterior painting is complete.
The Painting Company of Birmingham became a leading Alabama house painter because we take the beauty of your home seriously. Your satisfaction is what keeps us in business after all. We know the time and effort it takes to complete a beautiful home paint job so we are dedicated to making our services well worth the expense. Contact us at The Painting Company of Birmingham for further information on our house painting services in your area.
Two Dudes Painting Company worked closely with TONO Group to align each and every detail, resulting in a seamless renovation that leaves visitors wondering what remains from the original building’s frame and structure, what’s been re-purposed, and what elements are actually brand new. The resounding consensus among TONO staff and visitors alike is that every element, from old to new, blends together as a cohesive whole -- from the inside out.
I called several other painters to get estimates as well, always checking that the reviews were not fake (Like all 5 star reviews grouped within a month of each other, as if they had all their friends give them great reviews). I also checked with the California Contractors board to verify current Licences and if in fact the painters were working under their own license or working under some random contractor's license that wasn't even a painters license, (Some had no license at all!), I checked to see if the companies I interviewed were listed with the BBB, and if they were, if they had any unresolved claims against them.
Once you have removed all the loose paint, you should apply an appropriate primer to some of the distressed areas, especially if your paint-removal system has exposed raw wood or bare metal. The kind of primer you use depends on the kind of paint you'll be using later. For latex paint, use latex primers; for solvent-thinned paints, use solvent-base primers; and for metals, use metal primers. Not only do these coatings provide extra protection against the elements, they also form a firm foundation for finishing paints. Also, priming is always required when you're working on new wood.
More recently, professional painters are responsible for all preparation prior to painting. All scraping, sanding, wallpaper removal, caulking, drywall or wood repair, patching, stain removal, filling nail holes or any defects with plaster or putty, cleaning, taping, preparation and priming are considered to be done by the professional contracted painter.
When the primer is dry, caulk all small joints (less than ¼-inch-wide) in the siding and trim. Most pros use siliconized acrylics—paint won't stick to straight silicones—but Guertin and O'Neil like the new, more expensive urethane acrylics for their greater flexibility and longevity. O'Neil stresses that it's shortsighted to skimp on caulk. "If the joint fails, you're back to square one." Guertin uses the lifetime rating as his quality guide. "I don't expect 35-year caulk will last 35 years, but it should last longer than a 15-year caulk."
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
A fresh coat of paint makes everything it touches seem brand new. But such new beginnings cost real money. Professional painters charge around $4,000 for labor and materials to paint the exterior of a 2,500-square-foot, two-story home and roughly $5,500 for the interior. Painters’ rates may range from $20 to $60 an hour, but around $40 is typical in urban areas.
Historically, the painter was responsible for the mixing of the paint; keeping a ready supply of pigments, oils, thinners and driers. The painter would use his experience to determine a suitable mixture depending on the nature of the job. In modern times, the painter is primarily responsible for preparation of the surface to be painted, such as patching holes in drywall, using masking tape and other protection on surfaces not to be painted, applying the paint and then cleaning up.
URL The publishingPrinciples property indicates (typically via URL) a document describing the editorial principles of an Organization (or individual e.g. a Person writing a blog) that relate to their activities as a publisher, e.g. ethics or diversity policies. When applied to a CreativeWork (e.g. NewsArticle) the principles are those of the party primarily responsible for the creation of the CreativeWork.
No one enjoys the smell of paint, so the paints that we choose minimize odors so that you'll barely even realize we are there. Blink and you'll miss us! Our paints are also environmentally conscious, so you can have peace of mind in knowing that none of our products will cause any harm to the environment. Our paints are designed to last, so your home will stay looking great for many years to come.
Even though you live in your home, it’s not always easy choosing interior or exterior paint colors. In fact, for some homeowners, the wide variety of paint choices makes the process almost frustrating. No worries. Your A.L. Painting Co. interior painting professional can help you choose colors based on the mood you want to set, the amount of natural light that the room receives or the type of activity that will be going on in the room. Likewise, if your project is for exterior painting, we can help you choose a color that works with the style of the home, as well as what is appropriate for the community in which you live.
Use a wire brush and a wide-blade putty knife to remove small areas of defective paint. Scrub under the laps of clapboard siding as well as on downspouts and gutters. For speedier work on metal, a wire brush attachment on an electric drill will remove rust and paint with less effort. For more extensive paint removal, invest in a sharp pull scraper -- a tool with a replaceable blade that's capable of stripping old paint all the way down to bare wood with a single scrape. Hold the scraper so the blade is perpendicular to the wood, apply moderate to firm pressure, and drag it along the surface. Keep the blade flat against the wood so it doesn't gouge the surface.
Color World is a one-of-a-kind painting company, with a history of painting houses since 1997. We not only provide house painting services, we also offer commercial painting, power washing, gutter installation, holiday lighting, and minor drywall and carpentry work, plus much more. We are a truly unique operation, offering the services of five businesses in one. If you’re a homeowner looking for affordable painting and so much more, Color World can meet your needs. We have worked with several homes in your neighborhood and serve as your local, readily available contractors.
If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth.