House Painting Denver

For bigger houses or for faster work on smaller ones, rent a high-pressure spray cleaner. This device attaches to your home's water-supply system and puts out a jet of water at a pressure of about 600 pounds per square inch. It is equipped with a handheld wand tipped with a trigger-activated nozzle. The pressure is high enough to dislodge not only stubborn dirt, mildew, stains, and dried-on sea-spray salt, it's enough to remove peeling paint. In fact, if the jet nozzle is held too close to the surface it can even peel off perfectly sound paint, split open shingles, and drill a hole in siding. So follow the manufacturer's directions and wear goggles and protective clothing.
Painting your house is one of those maintenance projects that most homeowners undertake at some point, whether it's the outside or the inside. With the exception of hardened DIY-types (you know who you are!), just about all homeowners will hire painters at some point—whether to prepare their home for moving in, or for a sale, or perhaps to kick off a remodel with a new color scheme.

We got our estimate in a timely manner. The price was very reasonable. Rain put our job off a few weeks but you can't change mother nature. When the team arrived the temperatures were in the 90's. The team had to do a couple 1/2 days due to that but we assured them we were in no hurry. The final results were fabulous!! Our house is older but now looks so fresh and neat. I will recommend Color World to anyone who asks Thank you so much.


Concrete walls must always be prepared before painting, but in some cases previous finishes will also have to be removed so that paint doesn't peel or chip off. Additionally, special sealants, primers and paints may be applied to ensure concrete's endurance in face of the specific elements. Depending on the wall's condition and exposure to the sun, painting professionals will usually estimate between $500 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.), depending on wall area to cover.


As any painter will tell you, prep work is just as important -- if not more important -- than the paint application itself. If the paint on your house is chipping or peeling, it needs to be scraped and sanded smooth before applying a new finish. In most cases, you won’t need to remove all the existing paint, but scraping, sanding, patching, caulking, and priming are critical steps that take place before the start of most exterior painting jobs.
They were very professional and friendly. They were on time and got the job done quickly, even though it was one of the hottest weeks of the year! They were there to help us choose our colors. We love the new look! We appreciated that they use their own employees and didn't hire day laborers. We received a free, detailed estimated before we began and when we asked to add a couple of things during the job, we were given a written change order for approval.

Repaint — exteriors especially — before visible signs of wear appear, Bancroft says. Don’t wait until you see peeling or flaking paint. “If I have to spend 40 hours preparing the surface before we can paint, that time is going to result in a lot of extra costs. But if I can spend 10 hours preparing the surfaces to be painted, you’re going to save money,” Freeman says.
Use a wire brush and a wide-blade putty knife to remove small areas of defective paint. Scrub under the laps of clapboard siding as well as on downspouts and gutters. For speedier work on metal, a wire brush attachment on an electric drill will remove rust and paint with less effort. For more extensive paint removal, invest in a sharp pull scraper -- a tool with a replaceable blade that's capable of stripping old paint all the way down to bare wood with a single scrape. Hold the scraper so the blade is perpendicular to the wood, apply moderate to firm pressure, and drag it along the surface. Keep the blade flat against the wood so it doesn't gouge the surface.
Paint will be your next-biggest cost, at anywhere from $20 to $70 or more per gallon, depending on the sheen, the grade you’ve chosen and any special features. Some paints, for instance, are mold resistant. Others suppress smells or require fewer coats. Some have a lifetime warranty. Paints with warranties, however, may not be worth a higher price. In Consumer Reports tests approximating nine years of wear, only a few exterior paints and stains with lifetime warranties held up well. But “you’ll grow tired of the color long before a good-quality paint wears out,” Bancroft says.
If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth.
As our motto says, Speed + Quality = WOW. We guarantee that our team will always show up to your location on time and ready to get to work. All of our painters will arrive in uniform so that you know we mean business. We have taken great care in selecting the members of our team to ensure that they share our core values of friendliness and professionalism.

His team is very meticulous, very careful, very clean, and very courteous! They're also very accommodating. For instance, I mentioned a couple spots under some angled siding where I thought a little extra filling was needed, and they obliged without question. Same thing with a request for a stain-proof primer under a balcony. Doing these kinds of little things without question or extra charges is really nice!
Use a wire brush and a wide-blade putty knife to remove small areas of defective paint. Scrub under the laps of clapboard siding as well as on downspouts and gutters. For speedier work on metal, a wire brush attachment on an electric drill will remove rust and paint with less effort. For more extensive paint removal, invest in a sharp pull scraper -- a tool with a replaceable blade that's capable of stripping old paint all the way down to bare wood with a single scrape. Hold the scraper so the blade is perpendicular to the wood, apply moderate to firm pressure, and drag it along the surface. Keep the blade flat against the wood so it doesn't gouge the surface.
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.

The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
B. Harley Bradley House in Kankakee, Illinois. This commission helped launch Wright’s Prairie School period where he experimented with open floor plans, long ribbons of art-glass windows, horizontal elevations, and other elements that forever changed how homes were designed. An American Home: Frank Lloyd Wright’s B. Harley Bradley House spotlights the story of this architectural treasure and explores its uncanny connection to the rise, fall, and resurgence of its designer and the community in which it resides.
A house painter is responsible for painting the interior or exterior walls of a home. As a house painter, you must take great care to ensure that you do not damage any existing furniture or flooring by placing protective covers over important items in the house. You may have repair duties as well, helping to fix small holes or blemishes prior to painting them with brushes or rollers. While experience is not always necessary, you should have a keen eye for detail and brush skills.
Comment: We bought and had installed a fiberglass front door with sidelight panels that was primed but not painted. While taking the door off to paint it got a gouge in the front panel. We painted it black on the front and it did not come out well at all. hard to evenly coat, brush strokes show, etc. We are looking for someone to repair the gouge and repaint the entire door, black on the front and white on the back. We are hoping to get this done as soon as possible so the paint has to cure before the colder weather comes. Thank you

Every painting job develops a unique choreography as ladders go up and come down and tarps are unrolled and folded up. But two basic principles remain: 1) Start at the top and work down. 2) Work in the shade, out of the sun's glare. As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)
Since 1980, House Painting Inc. has aimed for excellence in painting contractor services. Our painters specialize in extensive prep work for the best finished painting results. We respond quickly to customer requests for estimates and job starts. We have earned our reputation as the best painting company in Los Angeles, Pasadena, Santa Monica and the surrounding area.
×