House Painting Denver

Start by thoroughly examining the outside of the house or outbuilding -- not just the exterior walls but under the eaves, around windows and doors, and along the foundation. Look for split shingles and siding, popped nails, peeling or blistering paint, mildew, and rust stains. Once you've identified the areas that need attention, roll up your sleeves and make the repairs.
There are permanent features of the home that have their own colors which cannot be changed when painting the exterior of the home but can have a dramatic satisfaction level that is experienced when the painting is completed.  Roofing shingles, paving blocks, concrete surfaces, stones and other such features are prime examples of the colors that should be considered when selecting your exterior color scheme for the home.  Homeowners can work off of these colors to make a home that looks uniform and luxurious when the exterior painting is complete.
Trees, bushes, and ornamental shrubs can also get in the way of your painting. Prune any branches that hang over the house or brush up against walls. Evergreen trees and tall bushes growing close to the house can be wrapped with canvas drop cloths. Tie one end of a rope around the trunk at least halfway up. Pull the top of the tree out and away from the house, and tie the other end of the rope to a stake placed farther out in the yard. Cover smaller shrubs, flower beds, sidewalks, and driveways with drop cloths to protect them from paint drips and spills.
Nolan in the Neighborhood is a community initiative supporting local organizations and events throughout Southeastern Pennsylvania. The company has committed to investing approximately $1,000,000 over the next ten years to support initiatives that improve the communities the company has served since its founding in 1979. Nolan Painting is an active community partner – attending, volunteering and sponsoring road races, concerts, festivals, silent auctions, shows and sporting events throughout the Main Line and surrounding areas in Delaware Valley.
Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.
O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."

For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.
A house painter is responsible for painting the interior or exterior walls of a home. As a house painter, you must take great care to ensure that you do not damage any existing furniture or flooring by placing protective covers over important items in the house. You may have repair duties as well, helping to fix small holes or blemishes prior to painting them with brushes or rollers. While experience is not always necessary, you should have a keen eye for detail and brush skills.
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.

Stucco is a specialized material that requires extensive preparation work (cleaning, caulking, filling in cracks, etc.). Additionally, paint suitable for rolling or brushing over stucco varies greatly depending on location and climate conditions. Some stucco paint varieties will chip and peel away in certain climate conditions, so painting professionals won't recommend them. These factors make stucco one of the more expensive siding materials to cover. You can expect to pay anywhere from $900 (~500 sq. ft.) to $3,000 (~1,500 sq. ft.) to have stucco revitalized with paint, depending on how much is needed to cover the home exterior.
Every painting job develops a unique choreography as ladders go up and come down and tarps are unrolled and folded up. But two basic principles remain: 1) Start at the top and work down. 2) Work in the shade, out of the sun's glare. As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)

When selecting a color scheme for the home’s exterior homeowners can choose color options that will correct flaws that they may feel exist with their home and property.  Some examples include utilizing two shades of a single color to make a home appear appropriately sized when the home may be too large or too tall.  To accomplish this effect individuals will want to place the darker tone on the upper level of the home’s exterior.  Smaller windows can appear more proportionately sized by trimming them in a lighter tone of paint.  Darker colors make a space or feature appear smaller.  The same effect can be obtained for homes positioned further away from a curb.  By using lighter tones the home will not feel camouflaged.


At Distinct Painting Company we focus on Quality, Integrity, Honesty and taking Pride in your project. When you hire us you get unbeatable customer service which ensures that the job is done right every time. When you hire Distinct Painting Company to take care of your painting/finishing project you get a team of professionals who care about your job the way you do. From the start of the project to the end, we will communicate the process clear and concise to ensure that your expectations are being met. During the prep phase, we thoroughly go over the entire house, prime all necessary areas, repair rotted wood and siding, re-seal the house, fix nail pop-outs and get the house ready for paint. The Prep Phase is one of the most important stages of any painting project and one many contractors fail to do thoroughly. If you are looking for a Quality paint/ finish job to protect your home for many years to come, then you have found the right company.
The house bath may reveal nails that have popped out of the siding or rusting nail heads that have left streaks of rust on exterior walls. If so, use sandpaper or steel wool to clean the nail heads. On clapboard siding, use a nail set to recess the nail head about ⅛ inch below the surface of the wood. Dab on a coat of rust-inhibiting primer (unless the nail is aluminum or nonrusting galvanized steel), and let it dry. Then fill the nail hole with spackle or putty. When the filler is dry, give it a coat of primer. For flathead nails, which cannot be recessed, sand the heads until they're shiny, and coat with primer.
The last big decision is how to apply the paint. Most pros use paint sprayers because they're fast, but in inexperienced hands a high-powered sprayer can leave drips, thin coats, and a mist that may land on many things other than your siding. If you do hire a painter who uses a sprayer, make sure he is meticulous about removing, covering, or masking off everything in the area that might get hit with overspray: gutters, roofs, windows, shrubbery, walkways, cars—you name it.
Homeowners with wood siding have the option of staining or painting siding that has been worn down by the elements -- especially if they need to increase its defenses against the sun or extreme humidity. Holes, missing pieces or other problems will increase the overall cost of the painting project. You can expect to pay between $700 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.) to paint wood siding, but this project will also help to protect the home's exterior from more extensive repairs down the road.
A number of details will affect the cost of painting the exterior of your house, such as its size, accessibility and siding type. In many cases though, preparation often has the biggest impact on the bottom line.Your local exterior painting contractor will take a look at the project to determine how extensive repairs and preparation will be and if special equipment, materials or paints are needed to get the job done right.
×