House Painting Denver

It was a pleasure working with Distinct Painting Co. from the estimate to completion. Kane Robinson (owner) is a true professional, both knowledgeable and friendly. The contract contained the date for painting to begin and they began earlier than expected. Preparation was quite involved as was the painting on my two story house. In spite of 25-40 mph wind gusts, they (Kane and Eric) continued to prep the house for painting. I am a bit of a perfectionist and appreciated the quality and attention to detail and the guarantee. The entire positive experience was worth every penny. My house looks incredible. I couldn't be happier and highly recommend Distinct Painting Co.
Distinct Painting Specializes in superior craftsmanship for your interior and exterior residential painting needs. When it comes to overall customer satisfaction, we deliver by providing high quality finishes on every job. We hold all of our work to the highest of standards by paying close attention to detail, respecting the customer and their home, communicating with the customer throughout the duration of the project, and operating within budget and specified time frame. Add to that our 8 year warranty on all work. We deliver with guaranteed satisfaction and peace of mind.  Call today to find out about our proven two coat system backed by our unbeatable warranty.
At Webfoot Painting our number one goal is making our customers happy. Whether painting the interior or exterior of your home, refinishing your wood deck, or tackling a build/repair project with our Carpentry team, we'll work with your schedule and budget to get your project done efficiently and to the highest quality.  No one cares more about the success of your project than our team at Webfoot.
Concrete walls must always be prepared before painting, but in some cases previous finishes will also have to be removed so that paint doesn't peel or chip off. Additionally, special sealants, primers and paints may be applied to ensure concrete's endurance in face of the specific elements. Depending on the wall's condition and exposure to the sun, painting professionals will usually estimate between $500 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.), depending on wall area to cover.
To remove a bad piece of siding, you have to pull out two rows of nails: the ones in the bad board itself, and those in the board directly above. Siding is thin and splits easily, so the tricky part of this job is pulling nails without damaging surrounding boards. A cat’s paw is the best tool for digging out nails if damage to the surrounding wood doesn’t matter (Photo 1).
PSA: Color psychology is a thing. The right soothing hue can work wonders for your mind and soul. You might think that only works for pale blues, but the contrast of a light and dark color — or, in this case, off-white walls with chocolate brown and deep blue accents — has a powerful effect. "The darker color grounds the room, and then the lighter runs right up to the ceiling and makes it feel higher. It creates this serene atmosphere," designer Laura Bohn told us.
A house painter is responsible for painting the interior or exterior walls of a home. As a house painter, you must take great care to ensure that you do not damage any existing furniture or flooring by placing protective covers over important items in the house. You may have repair duties as well, helping to fix small holes or blemishes prior to painting them with brushes or rollers. While experience is not always necessary, you should have a keen eye for detail and brush skills.
I hired House Painters Inc. and set up a date for them to come.  The whole operation took about 5 and a half days from start to finish.  Sung and his crew were extremely conscientious of all our belongings and took great care preparing the house.  They showed up on time at 8:30 everyday, and were completely unobtrusive with our comings and goings during their week here.
As you scrape, you may find that the wood has turned gray or black in some areas. Check for rot by probing these areas with a nail. Spots that are discolored but firm are simply weathered. Weathered wood doesn’t hold paint very well, so sand away the gray surface. If you find soft areas, you’ve got rot. Small, shallow soft spots can be dug out and repaired with a two-part filler such as Minwax High Performance Wood Filler. But when rot is deep and widespread, it’s best to replace the entire piece of wood.
Historically, the painter was responsible for the mixing of the paint; keeping a ready supply of pigments, oils, thinners and driers. The painter would use his experience to determine a suitable mixture depending on the nature of the job. In modern times, the painter is primarily responsible for preparation of the surface to be painted, such as patching holes in drywall, using masking tape and other protection on surfaces not to be painted, applying the paint and then cleaning up.[2]
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
There are permanent features of the home that have their own colors which cannot be changed when painting the exterior of the home but can have a dramatic satisfaction level that is experienced when the painting is completed.  Roofing shingles, paving blocks, concrete surfaces, stones and other such features are prime examples of the colors that should be considered when selecting your exterior color scheme for the home.  Homeowners can work off of these colors to make a home that looks uniform and luxurious when the exterior painting is complete.
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
Concrete walls must always be prepared before painting, but in some cases previous finishes will also have to be removed so that paint doesn't peel or chip off. Additionally, special sealants, primers and paints may be applied to ensure concrete's endurance in face of the specific elements. Depending on the wall's condition and exposure to the sun, painting professionals will usually estimate between $500 (~250 sq. ft.) and $2,000 (~1,000 sq. ft.), depending on wall area to cover.
We got our estimate in a timely manner. The price was very reasonable. Rain put our job off a few weeks but you can't change mother nature. When the team arrived the temperatures were in the 90's. The team had to do a couple 1/2 days due to that but we assured them we were in no hurry. The final results were fabulous!! Our house is older but now looks so fresh and neat. I will recommend Color World to anyone who asks Thank you so much.

I am beyond thrilled with the job this company did. I researched a lot of house painters and other contractors and not only did these guys actually come out to do the consultation like they said they would, they brought a ton of pictures of past jobs and references and their price was competitive, I knew these were my house painters. We hired them and they did a fantastic job prepping, painting and cleaning up afterwards. They were incredibly efficient and professional, even came back to touch up a spot that was missed.   I'm so happy with how my house looks and I've already referred a coworker to these guys.
Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.

All colors have a base tone which might not be as apparent on a small swatch, but when the color is painted over an entire wall or room – the base color will stand out. Brown colors will sometimes appear to have a pink hue to them, and greys very often have some purple or blue to them. To avoid being surprised by a base color, take some time to look at the color fan deck for the selected paint color to see where the color comes from.
The last big decision is how to apply the paint. Most pros use paint sprayers because they're fast, but in inexperienced hands a high-powered sprayer can leave drips, thin coats, and a mist that may land on many things other than your siding. If you do hire a painter who uses a sprayer, make sure he is meticulous about removing, covering, or masking off everything in the area that might get hit with overspray: gutters, roofs, windows, shrubbery, walkways, cars—you name it.
Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.

Historically, the painter was responsible for the mixing of the paint; keeping a ready supply of pigments, oils, thinners and driers. The painter would use his experience to determine a suitable mixture depending on the nature of the job. In modern times, the painter is primarily responsible for preparation of the surface to be painted, such as patching holes in drywall, using masking tape and other protection on surfaces not to be painted, applying the paint and then cleaning up.[2]
Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.
Deciding which paint to use has gotten much easier now that acrylic latexes have pushed oil-based paints almost to extinction. The acrylics offer superior performance (they don't harden with age, the way oils do, so they move and breathe without blistering), they don't mildew as readily, and they emit fewer VOCs, so they comply with new air-quality regulations. They also work over both oil- and water-based primers.
Whether you are looking for warm tones to match the beautiful desert environment or a stark white to provide a brilliant contrast against the natural backdrop, we can help you achieve your desired effect. Our services don't just cover the outside of your house, though; we can paint interiors as well. It's all part of what we do here at WOW 1 DAY PAINTING.

President Trump sits comfortably at a table with a glass of Diet Coke inches from his left arm. Looking noticeably leaner, the president has a charming grin on his face as he listens to Abraham Lincoln. Surrounding the pair are a host of other past Republican presidents: the Bushes (George H.W. and George W.), Gerald Ford, Richard Nixon, Theodore Roosevelt, Dwight D. Eisenhower and Ronald Reagan.


The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).

We got our estimate in a timely manner. The price was very reasonable. Rain put our job off a few weeks but you can't change mother nature. When the team arrived the temperatures were in the 90&#…039;s. The team had to do a couple 1/2 days due to that but we assured them we were in no hurry. The final results were fabulous!! Our house is older but now looks so fresh and neat. I will recommend Color World to anyone who asks Thank you so much. more »
More recently, professional painters are responsible for all preparation prior to painting. All scraping, sanding, wallpaper removal, caulking, drywall or wood repair, patching, stain removal, filling nail holes or any defects with plaster or putty, cleaning, taping, preparation and priming are considered to be done by the professional contracted painter.
If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer.
Painters often tint primer close to the color of the top coat, but Wallis thinks that's a recipe for "holidays," or missed spots. Instead, he tints his primer a contrasting color. "If I can see the color coming through, I know I need to apply more paint," he says. On the cottage shown in this story, he chose a gray-blue primer to go under a peach top coat.

Overall, we are happy with the work. Everyone we interacted with from Color World really cared that we were satisfied with the quality of work, the timeline, and the adjustments that had to be made to our estimate due to additional unanticipated work (multiple coats on window trim). Tom, Schell, Jeff & Tracey, Shawn and his paint crew were all experts at what they do.
A fresh paint job has the power to totally transform the look of your house in less time and for less cash than any other remodeling project. That thin skin of resin and pigment also protects your investment, shielding it from sun, wind, and rain—until the paint begins to crack and peel, that is. Then it's time to button up with a couple of new coats. Properly applied, new paint should last for a good 15 years, provided you use top-quality materials, apply them with care (and with an eye on the weather), and, most important, clean and sand every surface first. Here's what you need to know to get a first-class finish on your home's exterior.

We are a family-owned business with over 75 years of collective experience in house painting, residential interior and commercial interior and exterior painting. We have over 3500 satisfied customers, and over the years we have painted more than 6000 houses. We offer a reputable follow up program, and we would be pleased to become part of your maintenance team for your house, apartment complex or commercial property. We invite you to check us out on Angie’s List where we have an A+ rating.
To get at the nails in the board above, shove a flat pry bar up under it and gently pry the board outward. In most cases, this will pop up the nailhead, so you can pull it with your hammer claw. If you run into a stubborn nail that won’t move easily, don’t use brute force and risk splitting the good board. Instead, slip a hacksaw blade behind the siding and cut the nail (Photo 2).You can’t get the new board in unless you pull the remaining shank of the cut nail (Photo 3).
×