Depending on just how dirty the outside of your house is and on the house's size, there are two ways to approach this job. If you live in an average-size house, use a garden hose with a carwash brush attachment to bathe the big areas. For caked-on dirt, use a scrub brush or a sponge and a pail of warm water with a good, strong household detergent in it. Work from the top down, and rinse all areas where you scrubbed with water.
To get at the nails in the board above, shove a flat pry bar up under it and gently pry the board outward. In most cases, this will pop up the nailhead, so you can pull it with your hammer claw. If you run into a stubborn nail that won’t move easily, don’t use brute force and risk splitting the good board. Instead, slip a hacksaw blade behind the siding and cut the nail (Photo 2).You can’t get the new board in unless you pull the remaining shank of the cut nail (Photo 3).
Overall, we are happy with the work. Everyone we interacted with from Color World really cared that we were satisfied with the quality of work, the timeline, and the adjustments that had to be made to our estimate due to additional unanticipated work (multiple coats on window trim). Tom, Schell, Jeff & Tracey, Shawn and his paint crew were all experts at what they do.
If you want something done right and on time, we are your painting contractors. What makes us different from our competitors is our company promise to our customers. We get to know our customers and learn what is important to them. We start and finish on time, maintain a neat and clean work environment, provide a total commitment to all details, stand behind our work, pledge an assurance of high quality and guarantee 100% customer satisfaction. We deliver that promise every time to every customer. We are professional, prompt, friendly and honest residential and commercial Philadelphia painters in Delaware Valley.
No one enjoys the smell of paint, so the paints that we choose minimize odors so that you'll barely even realize we are there. Blink and you'll miss us! Our paints are also environmentally conscious, so you can have peace of mind in knowing that none of our products will cause any harm to the environment. Our paints are designed to last, so your home will stay looking great for many years to come.
Beginning with the prep work and ending with last coat of paint or the finishing, an exterior paint job will last anywhere from one to two weeks. After completion, homeowners using low-quality paint will need to repaint every four or five years to keep it well maintained; homeowners using high-quality paint can go longer without a new coat -- usually about seven or eight years, depending on the type of paint and material.
NOTE: Member service professional information confirmed as described above may change or expire over time; while HomeAdvisor attempts to maintain accurate and up-to-date information, and confirms changes when notified, we cannot guarantee that profile and screening information is accurate. Therefore, we recommend that before working with a service professional you verify that information presented is still current and/or acceptable to you.
For interior jobs, make sure you've cleaned all of the awkward spots, including behind the toilet, and picked up any knickknacks that might get in the way (e.g., soap containers, loofahs, and kitchen organizers). Removing the switch plates and outlet covers from the walls also goes a long way toward speeding up painting time—and painters' time is (your) money.
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
As you scrape, you may find that the wood has turned gray or black in some areas. Check for rot by probing these areas with a nail. Spots that are discolored but firm are simply weathered. Weathered wood doesn’t hold paint very well, so sand away the gray surface. If you find soft areas, you’ve got rot. Small, shallow soft spots can be dug out and repaired with a two-part filler such as Minwax High Performance Wood Filler. But when rot is deep and widespread, it’s best to replace the entire piece of wood.